MARKER PRESENTS THE NEW DUKE PT BINDING!Well, the wait is finally over. Marker just announced their new Duke PT Binding. This is a Hybrid Freeride Binding that offers DIN ISO certified release at both the toe piece and the heel and comes in two versions, the Duke PT 16 offers a 6 to 16 release value and the Duke PT 12 with a 4 to 12 range.
Markers innovative Ride & Hike toe design means you get full safety release properties in downhill mode and a Kingpin-like pin binding on the uphill. You can even save 250 grams by removing the toe section and stowing it in your pack. The Duke PT 12 weighs just 850 grams in uphill mode and 1,090 grams in downhill mode. The Duke PT 16 is only slightly heavier, weighing in at 1,000 grams in uphill mode and 1,280 grams in downhill mode. The Marker Duke PT's have a stand height of just 27mm and provide a built-in 10° climbing aid.
Marker's new Duke PT Bindings offer the best of the up and the down.
Here's the full press release from Marker for your reading enjoyment:
PENZBERG, Germany - (November 1, 2019)
The Royal Family success story continues. Marker, the binding specialist based in Penzberg, Germany, presents the follow-up version of the legendary Duke, setting yet another milestone for the binding market. With the new Duke PT, a hybrid freeride binding, the company expands the boundaries for big mountain enthusiasts and expands its product portfolio with another pioneering ski binding.
The ski industry in general, and the binding segment in particular, have undergone a number of changes. Evolutions in boots and skis have given skiers access to more and more of the mountain, with products that deliver an incredibly wide range of use. Product managers, developers and designers from the Penzberg company keep a watchful eye on these developments, and work with energy and commitment on products that provide skiers with the best possible set-up for their chosen discipline. Duke. Baron. Jester. Griffon. KingPin. Alpinist - these are just some of the products from Marker that have revolutionized the binding market in recent years and continue to shape the market today. Yet another highlight product is added to this impressive portfolio for the 20/21 winter season: the Marker Duke PT (Pin Technology).
No compromise downhill, easy-going uphill
Marker has tapped into all the experience gained in the freeride segment with its Royal Family to set a new milestone in an emerging category: hybrid freeride bindings. Marker sees a future here - no other type of binding manages to combine touring functionality and big mountain performance so flawlessly. The Duke PT blends the sort of downhill performance you get with the Jester with the uphill properties of a pin binding. For the 20/21 winter season Marker launches the Duke PT 16 and the Duke PT 12. Both models ensure DIN ISO certified release at both the toe piece and the heel, with a 6 to 16 range on the Duke PT 16 and a 4 to 12 range on the Duke PT 12.
The biggest highlight on the new Duke PT is the innovative Ride & Hike toe. In ride mode it provides uncompromising downhill performance with full safety release properties up to DIN 16. In the event of a fall, the gliding AFD (Anti Friction Device) aids the lateral release unhindered by dirt, snow and ice. Switching the binding to hiking mode is simply a matter of unlocking the upper part of the toe piece and rotating it forward. In uphill mode, you have the option of saving 250 grams of weight per binding at the foot by removing the toe sections and stowing them in your backpack.
Alternatively, the toe housing sections can be locked in the forward rotated position so you can quickly revert to downhill mode after a short uphill section. To switch to downhill mode the toe housing is clicked back onto the base plate. It locks into place thanks to Auto Quad Lock technology, just by stepping into the binding, without any extra action required by the skier. Pin binding technology is integrated in the base plate underneath the toe housing section and operates in much the same way as the KingPin and Alpinist models from Marker. The toe piece also has Sole.ID technology, just like other products in the Royal Family. This makes the binding compatible with all boot sole types falling under the alpine (ISO 5355), touring (ISO 9523), or GripWalk (ISO 9523) norms.
Skiers using the Duke PT 16 will enjoy the superior holding power of the Inter Pivot Heel known from the former Jester and Duke models, and it has been redesigned to offer an easier step-in function. With its high-quality magnesium housing the heel covers release values from DIN 6 to 16, meeting the needs of even the most demanding big mountain environments. Premature releases are not only unwanted but also dangerous - this was something that played a major role in the development of the Duke PT and is the reason why the famous freeride heel from the Royal Family was used.
The multi-functional Lock & Walk brake is another highlight in terms of functionality. In addition to the traditional braking function it offers a brake lock and a 10° climbing aid that can be operated with a ski pole. The key difference on the Duke PT 12 is a new Hollow Linkage heel, offering a weight savings of approximately 200 grams.
The most advanced binding of its type
Currently the lightest binding in its class, the Duke PT 12 weighs just 850 grams in uphill mode and 1,090 grams in downhill mode. The Duke PT 16 is only slightly heavier, weighing in at 1,000 grams in uphill mode and 1,280 grams in downhill mode. Its light weight ensures maximum downhill maneuverability, and a low stand height of 27 mm for both models ensures direct power transmission and quick edge changes – a benefit greatly appreciated by all skiers. All of these features and technologies naturally make the Duke PT one of the most advanced bindings in the hybrid freeride sector. Switching your setup mid-day to get the right bindings becomes a thing of the past – even if you spontaneously decide to do a quick skin lap - so you can concentrate on skiing and leave the rest to the binding.